The Axesstel AXW-D800 router is one of two routers made by Axesstel, the other being the Axesstel AXV-D450 router. If you need help with router settings, refer to the user manual for the CDMA 1xEVDO Wireless Broadband Modem, which is included below.
Axesstel AXW-D800 Router
The default username and password for the Axesstel AXW-D800 router is admin | admin. The default IP address is most likely to be one of the following: 192.168.0.1, 192.168.1.1, or 10.0.0.1. This is the IP address that you would use to log in to the router’s interface. If you changed the IP address before, it will be the IP address you chose. Note that you should exercise caution when changing the IP address, as it can affect your network.
Changing the IP address on the Axesstel AXW-D800 router is easy. First, log in with the default username and password. Then, click on “Network” and select “LAN”. This is the default IP address. Change the router IP there and click on “save”. Leave the subnet mask at 255.255.255.0 and enable the DHCP server. Finally, restart the router to apply the changes.
To change the DNS on the Axesstel AXW-D800 router, you need to log in with the default IP address and username and password. Click on “Network”, then change the primary and secondary DNS as needed. This process is similar to changing the DNS on other Axesstel routers. See also the settings for the Axesstel MV400 Router as well as the Axesstel D8190AF Router Settings.
Additionally, if you are facing a UART issue, you can find the ft232r USB UART driver, the XR16L580 UART, and the CP2109 USB to UART driver on this page along with default UART drivers. However, if you are not dealing with a UART issue, you can simply follow the instructions above to adjust the settings on the router.
